 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-3
HEATER CORE - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION
Push into place.
Heater core (2)
13. Heater (1)
Screw in and tighten using 1/4-inch
Four screws (3)
14. Heater core (2) to
socket and handle.
with captive
heater (1)
Iockwashers
Push into place.
Cover (4)
15. Heater (1)
Screw in and tighten using 1/4-inch socket
Four screws (5)
16. Cover (4) to
and handle.
with captive
heater (1)
Some covers may use five screws.
Iockwashers
NOTE
Step 17 is necessary only if heater has access cover.
Screw in and tighten using 3/16-inch
Two screws (7)
17. Access cover (6)
flat-tip screwdriver.
Push into place.
Two grommets (10)
18. Two nipples (8)
and (9)
Push on until seated.
Return hose (11)
19. Nipple (8)
a. Put in place over nipple (8).
Clamp (12)
20. Return hose (11) to
b. Using 1/4-inch flat-tip screwdriver,
nipple (8)
tighten.
Push on until seated.
Heater hose (13)
21. Nipple (9)
a. Put in place over nipple (9).
Clamp (14)
22. Heater hose (13) to
b. Using 1/4-inch flat-tip screwdriver,
nipple (9)
tighten.
Fill (TM 9-2320-270-10).
Cooling system
23.
4-1288
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals