|
|
TM 9-2320-270-20-3
AIR HORN - CONTINUED
.
ACTION
ITEM
REMARKS
LOCATION
DISASSEMBLY
NOTE
Except as noted, steps are the same for disassembling both right and left horn.
However, do not mix parts. Right horn is shown,
a. Using cross-tip screwdriver, unscrew
Four screws (3),
9. Cover(1) to
and take out.
four Iockwashers (4),
body (2)
b. Get rid of Iockwashers (4).
and one tag (5)
Left horn does not have part
number tag.
Lift off.
10. Body (2)
Cover (1)
Take out.
Spring (6), contact
11.
(7), and diaphragm (8)
Snap out.
Contact (7)
12. Spring (6)
Using 5/32-inch key, and 1/2-inch
Spring seat (9) and
13. Cover (1)
nut (10)
wrench, unscrew and take off.
Using adjustable wrench, unscrew and take
Bell (11)
14. Body (2)
off.
Using pocket knife, pry out.
Screen (12)
15. Bell (11)
CAUTION
Do not remove coupling unless inspection shows need for replacement.
Using pipe wrench, unscrew and take off.
16. Body (2)
Coupling (13)
Repeat steps 9 thru 17.
Left horn (14)
17.
CLEANING
All parts
Clean according to general maintenance
18.
instructions (page 4-1).
4-1254
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |