INSTALLATION - CONTINUED - TM-9-2320-270-20-30362

TM 9-2320-270-20-3

MIRROR MOUNTING TUBE ASSEMBLY - CONTINUED

ACTION

REMARKS

ITEM

LOCATION

INSTALLATION CONTINUED

NOTE

Steps are the same for installing both right and left support arms. Right support arm is

shown.

Push in until screw holes line up.

Support arm (2)

41. Mounting tube (1)

Screw in and tighten by hand.

Two wing screws (3)

42. Support arm (2) to

mounting tube (1)

Put in place.

Two outer cross

43. Support arm (2)

braces (4) and (5)

Screw in but do not tighten.

Screw (6), new

44. Two cross braces

Iockwasher (7),

(4) and (5) to

and nut (8)

support arm (2)

a. Slide up or down until holes line up.

Outer cross

45. Rear cross brace

b. Put in place.

brace (4)

bracket (9)

Screw in and tighten using 9/16-inch open-

Screw (10), new

46. Outer cross brace

end wrench, 9/16-inch socket, and 3/8-

Iockwasher (11),

(4) to outer cross

inch drive handle.

and nut (12)

brace bracket (9)

a. Slide up or down until holes line up.

Outer cross

47. Front cross brace

b. Put in place.

brace (5)

bracket (13)

TA240774

4-1240