|
|
TM 9-2320-270-20-3
MIRROR MOUNTING TUBE ASSEMBLY - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION - CONTINUED
Put in place.
Right mounting tube
31. Roof (1)
bracket (2)
Screw in and tighten using 7/16-inch box
Two screws (3), new
32. Right mounting tube
wrench, 7/16-inch socket, and 3/8-inch
Iockwashers (4), and
bracket (2) to
drive handle.
nuts (5)
roof (1)
Put in place.
Right inner roof
33. Side rail (6)
panel (7)
Screw in and tighten using number two
Six screws (8)
34. Right inner roof
cross-tip screwdriver.
panel (7) to side
rail (6)
NOTE
Steps are the same for installing all four cross brace brackets. Right rear bracket is
shown.
Put in place.
Cross brace
35. cowl (9)
bracket (10)
Screw in and tighten using 3/8-inch
Three screws (11)
36. Cross brace bracket
socket, extension, and 3/8-inch drive
(lo) to cowl (9)
handle.
TA240772
4-1236
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |