 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-3
WIPER ARM AND BLADE - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
NOTE
it is not necessary to remove wiper arm to replace blade.
Nut (3) and
Wiper blade (1)
Using 5/16-inch wrench, unscrew and
1.
washer (4)
take off.
to wiper arm (2)
Wiper blade (1)
Lift up arm (2) and take out.
2.
Wiper arm (2)
Nut (6) and
a.
Using 7/16-inch wrench, unscrew and
Wiper arm (2)
3.
lockwasher (7)
take off.
to wiper shaft (5)
b.
Get rid of lockwasher (7).
Wiper arm (2) and
a.
Protect wiper arm (2) with rag.
Wiper shaft (5)
4.
drive cone (8)
b.
Using pliers wrench, pull off.
c.
Pull off drive cone (8).
NOTE
if drive cone stays wiper arm, do steps 5 and 6.
Wiper arm (2)
Rest on vise.
5.
Drive cone (8)
Using hammer and punch, tap out.
6. Wiper arm (2)
INSTALLATION
Drive cone (8)
Put in place.
7. Wiper shaft (5)
Wiper blade (1)
Put in place.
8. Wiper arm (2)
Washer (4)
Screw on but do not tighten.
9. Wiper blade (1) to
and nut (3)
wiper arm (2)
Wiper shaft (5)
Make sure wiper shaft is all the way to
10.
right stop.
If necessary, use pliers wrench on
flats to carefully turn it to right
stop. Right stop is left when facing
windshield.
4-1206
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals