|
|
TM 9-2320-270-20-3
WINDSHIELD WIPER MOTOR - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL - CONTINUED
Using 9/16-inch wrench, unscrew and pull
Left air line (2)
12. Elbow (1)
out.
Using pliers, pull out.
Insert (3)
13. Left air line (2)
or elbow (1)
Lift out.
Windshield wiper
14. Header (4)
motor (5)
a. Using pocket knife, cut tape and take
Check valve (7)
15. Vent line (6)
off.
b. Get rid of.
Pull off.
Vent line (6)
16. Check valve (7')
Using 9/16-inch wrench, unscrew and pull
Right air line (9)
17. Adapter (8)
out.
Using pliers, pull out.
Insert (10)
18. Right air line (9)
or adapter(8)
Take out.
Windshield wiper
19.
motor (5)
DISASSEMBLY
a. Using pocket knife, cut tape and
Bushing
20. Spacers (11)
take off.
assembly (12)
b. Get rid of.
a. Note number of spacers (11).
Spacers (11)
21. Bushing
b. Take off.
assembly (12)
Using 1/4-inch flat-tip screwdriver, un-
Two screws (13)
22. Bushing assembly
screw and take out.
(12) to wiper
motor (5)
Take off.
Bushing
23. Wiper motor (5)
assembly (12)
4-1194
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |