|
|
TM 9-2320-270-20-3
WINDSHIELD WIPER MOTOR - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
REMOVAL
WARNING
Make sure all pressure is drained from air system before disconnecting air lines. Parts
under pressure can, when removed, fly off with great force causing injury to personnel.
NOTE
Except as noted, steps isn this task are the same for both right and left windshield wiper
motors. Right windshield motor is shown.
Tag air lines according to general maintenance instructions (page 4-1).
Air system
Drain (TM 9-2320-270-10).
1.
Windshield wiper
Remove (page 4-1205).
2.
arm and blade
Drive cone (2)
Pull Off.
3. Windshield wiper
shaft (1)
Boot (4)
Pull off.
4. Nut (3)
Nut (3), washer (6),
a. Using 9/16-inch wrench, unscrew and
5. Bushing (5)
spacer (7), and
take off.
gasket (8)
b. Get rid of gasket (8).
6.
Windshield wiper
Two screws (11),
Using 3/16-inch flat-tip screwdriver, un-
motor (9) to
washers (12), and
screw and take out.
header (10)
gaskets (13)
7.
Front inner roof
Four screws (15),
Using number three cross-tip screwdriver,
panel (14)
and two sun visor
unscrew and take off.
assemblies (16)
Two windshield wiper
Two nuts (19)
Using 7/16-inch wrench, unscrew and take
8.
handles (17) to
off.
wiper motors (18)
Two handles (17)
9.
Wiper motors (18)
Take off.
4-1192
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |