|
|
TM9-2320-270-20-3
WINCH THROTTLE VALVE - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION
Elbow (2)
a.
Wrap threads with teflon tape
12. Winch throttle
valve (1)
(page 4-1).
Using 5/8-inch wrench, screw in and
b.
tighten.
Using plastic hammer, tap in.
Insert (3)
13. Elbow (2)
a. Wrap threads with teflon tape
Elbow (4)
14. Winch throttle
(page 4-1).
valve (1)
b. Using 5/8-inch wrench, screw in and
tighten.
insert (5)
Using plastic hammer, tap in.
15. Elbow (4)
Place in position.
Winch throttle
16. Winch control
valve (1)
panel (6)
Put in.
Bracket (7)
17. Winch control
panel (6)
Two screws (8), new
Screw in and tighten using 1/2-inch
18. Bracket (7)
Iockwashers (9), and
wrench.
nuts (10)
Two screws (11) and
Screw in and tighten using 1/2-inch
19. Winch control
new iockwashers (12)
wrench.
valve (1)
Hose (13)
Using 5/8-inch wrench, screw on and
20. Elbow (2)
tighten.
Hose (14)
Using 5/8-inch wrench, screw on and
21. Elbow (4)
tighten.
Front cover
Place in position.
22. Winch control
plate (15)
panel (6)
12 screws (16), new
Screw in and tighten using 1/2-inch
23. Front cover
Iockwashers (17),
wrench.
plate (15)
and washers (18)
4-1144
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |