|
|
TM 9-2320-270-20-3
GRAB HANDLE
This task covers:
c. inspection/Replacement (page 4-1 118)
a. Removal (page 4-1118)
d. Installation (page 4-1118)
b. Cleaning (page 4-1118)
INITIAL SETUP
Materials/Parts
Tools
Lockwasher (two required)
Handle, ratchet, 3/8-inch drive
Socket, 9/16-inch, 3/8-inch drive
Personnel Required
Wrench, open-end, 9/16-inch
One
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
a. Using socket, handle, and wrench, un
Two screws (3),
1. Grab handle (1)
lockwashers (4),
screw and take out.
to cab (2)
b. Get rid of Iockwashers (4).
and nuts (5)
Take off.
Grab handle (1)
2. Cab(2)
CLEANING
Clean according to general maintenance
All parts
3.
instructions (page 4-1).
INSPECTION/REPLACEMENT
Ail parts
Inspect according to general maintenance
4.
instructions (page 4-1).
INSTALLATION
Put on.
Grab handle (1)
5. C a b ( 2 )
Screw in and tighten using socket, handle,
Two screws (3),
6. Grab handle (1)
new Iockwashers
and wrench.
to cab (2)
(4), and nuts (5)
4-1118
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |