|
|
TM 9-2320-270-20-3
FRONT SPRING PINS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
FRONT REAR PIN REMOVAL
NOTE
If frame has been raised for front front pin removal, skip step 10.
WARNING
Some parts are heavy. Be careful when handling them. Lifting equipment is needed
when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds
(45 kg) for a two person lift, and over 150 pounds (68 kg) for a three or more person
lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy parts
supported only by lifting equipment. Failure to observe this precaution could cause
serious injury or death of personnel.
10. Truck
Frame (8)
a. Using lifting equipment, lift.
b. Remove trestles.
c. Using lifting equipment, lower.
11. Shackle pin (9)
Lubrication
Unscrew and take out using 7/16-inch
fitting (10)
wrench.
12.
Lockpin (11), washer
a. Using 3/4-inch wrench, unscrew and
(12), and nut (13)
take out.
b. Using hammer and punch, drive out
Iockpin (11).
13. Bracket (14)
Shackle pin (9)
Using hammer and drift, drive out.
Shackle pin is threaded on end for
lubrication fitting. When driving
out, do not damage threads.
TA240674
4-1077
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |