|
|
TM 9-2320-270-20-3
SPARE TIRE MOUNT, WINCH, AND CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
16. Cable (6)
Clamp (7)
Using pliers, bend cable (6) as shown and
place clamp (7) in position.
17. Clamp (7)
Nut (8)
Screw in and tighten using 7/16-inch
socket and ratchet to tighten.
18. Wheel (9)
Bearing (10), two
Apply grease and put together.
washers (11), and
washer (12)
19. Spare tire mount (2)
Wheel (9), two
Place in position.
washers (11), bearing
Make sure cable is on top of
(10), and washer (12)
wheel.
20.
Bolt (13)
Push into place.
21. Bolt (13)
New self-locking
Screw on and tighten using 9/16-inch
nut (14)
socket, ratchet, and 9/16-inch box
wrench.
TA240662
4-1059
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |