|
|
TM 9-2320-270-20-3
POWER STEERING PUMP - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
ASSEMBLY CONTINUED
Put in place.
New Packing (2)
27. Nut (1)
Wrap threads with teflon tape
Elbow (4) and
a.
28. Power steering
nut (1)
(page 4-1).
pump (3)
b. Screw in and tighten using two 7/8-inch
wrenches.
a.
Wrap threads with teflon tape
Elbow (5)
29.
(page 4-1).
Screw in and tighten using 1 1/8-inch
b.
wrench.
Wrap threads with teflon tape
a.
Reducer (6)
30.
(page 4-1).
b. Screw in and tighten using adjustable
wrench.
a.
Wrap threads with teflon tape
Elbow (7)
31. Reducer (6)
(page 4-1).
b. Screw in and tighten using 1 5/16-inch
wrench.
INSTALLATION
Power steering
Set on end, shaft up.
32.
pump (3)
Put on.
Coupling (9)
33. Drive gear (8)
Put in place.
New gasket (10)
34. Power steering
pump (3)
Put pump (3) in place and engage teeth.
Coupling (9)
35. Drive plate (11)
Push into place.
Power steering
36. Adapter (12)
pump (3)
Two screws (13) and
Screw in and tighten using 9/16-inch
37. Power steering pump
new Iockwashers (14)
wrench.
(3) to adapter (12)
Pressure hose (15)
Screw on and tighten using 15/16-inch
38. Elbow (4)
and 7/8-inch wrenches.
Screw on and tighten using 1 1/4-inch
Return hose (16)
39. Elbow (5)
and 1 1/4-inch wrenches.
4-990
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |