 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-3
STEERING GEAR - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
ADJUSTMENT - CONTINUED
a. Using socket, handle, and box wrench,
Screw (2), nut (3),
2. Pitman arm (1)
unscrew and take out.
and Iockwasher (4)
b. Get rid of Iockwasher (4).
a. Using puller, pull off.
Pitman arm (1)
3. Levershaft (5)
b. Support pitman arm on steering
arm (6).
With engine off, have assistant turn
Steering wheel (7)
4.
steering wheel lock to lock and then back
to center noting any roughness.
If there is any roughness, notify
direct support maintenance.
Using 3/4-inch socket and handle, unscrew
Locknut (10)
5. Adjusting screw (8)
almost all the way.
to steering gear (9)
Using screwdriver, screw in until adjust-
Adjusting screw (8)
6. Steering gear(9)
ing screw (8) starts to tighten.
a. Have assistant turn lock to lock.
Steering wheel (7)
7.
There should be slight drag and no
play at center. Drag should decrease
and play increase as the steering
wheel is turned toward locks.
b. If there is no drag at center, tighten
adjusting screw (8).
c. If there is heavy drag at center,
loosen adjusting screw (8).
If there is still no drag at center,
after tightening, and if steering is
loose at center, then drag increases
and decreases, notify direct support
maintenance.
Screw down and tighten using socket and
Locknut (10)
8. Adjusting screw (8)
handle.
to steering gear(9)
4-982
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals