ADJUSTMENT CONTINUED - TM-9-2320-270-20-30048

TM9-2320-270-20-3

PITMAN ARM STOP BRACKET- CONTINUED

ACTION

REMARKS

ITEM

LOCATION

ADJUSTMENT CONTINUED

WARNING

Do not get between wheels and fender, or between other moving and stationary parts,

while assistant is turning wheels. There is no clearance for personnel in these areas

when turning vehicle.

Hearing protection must be worn while working under truck with engine running to

prevent possible ear injury.

a. Position 1/16-inch (1.59 mm) thick-

Left front spindle

6. Left side of front

ness gage between ball (3) and stop-

stopscrew (2) and

axle (1)

screw (2).

right axle ball (3)

b. Have assistant slowly turn steering

wheel right until stopscrew (2)

is stopped by thickness gage.

c. Have assistant hold steering in this

position.

Using two 3/4-inch open-end wrenches,

Rear pitman arm

7. Pitman arm stop

unscrew part way.

stopscrew (5)

bracket (4)

and locknut (6)

Using two 3/4-inch open-end wrenches,

Inner nut (7) and

tighten stopscrew (5).

stopscrew (5)

Using two 3/4-inch open-end wrenches,

Locknut (6)

tighten.

Shut down (TM 9-2320-270-10).

Engine

10.

4-976