DISASSEMBLY CONTINUED - TM-9-2320-270-20-30042

TM9-2320-270-20-3

TIE ROD - CONTINUED

ACTION

REMARKS

ITEM

LOCATION

DISASSEMBLY CONTINUED

NOTE

Do not remove tie rod end grease fittings unless damaged.

Step is the same for right or left tie rod end grease fitting. Left tie rod end is shown.

Using 7/16-inch wrench, unscrew and take

Grease fitting (2)

11. Left tie rod end (1)

out.

CLEANING

Clean according to general maintenance

All parts

12.

instructions (page 4-1).

inspection/REPLACEMENT

Inspect according to general maintenance

All parts

13.

instructions (page 4-1).

ASSEMBLY

NOTE

Left tie rod end has left hand threads, right tie rod end has right hand threads.

Skip step 14 if grease fitting was not removed.

Screw in and tighten using 7/16-inch

Grease fitting (2)

14. Tie rod ends (1)

wrench.

and (3)

Screw in but do not tighten.

Four screws (5),

15. Tie rod ends (1)

new Iockwashers (6),

and (3) to tie

and nuts (7)

rod (4)

a. Using ball-peen hammer and chisel,

Left tie rod

16.

spread enough so it can be screwed on.

end (1)

b. Screw on counterclockwise.

Screw on clockwise.

Right tie rod

17. Tie rod (4)

end (3)

4-970