|
|
TM9-2320-270-20-3
DASH BRACE- CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION CONTINUED
Have assistant lift into place and hold.
Steering column (1)
29.
Two capscrews (4),
Screw in and tighten using 1/2-inch box
Steering column
30.
wrench, 1/2-inch socket, and handle.
nuts (5), and new
brace (2) to
Iockwashers (6)
dash brace (3)
With help of assistant, screw in and tighten
Two capscrews (9),
Steering column
31.
nuts (10), and new
using 1/2-inch box wrench, 1/2-inch sock-
mounting plate (7)
Iockwashers (11)
et, and handle.
to floor (8)
Place in position.
Floor mat (12)
Floor (8)
32.
Push down.
Rubber grommet (13)
Steering column (1)
33.
Put in place.
Air manifold (14)
Dash brace (3)
34.
and two screws (15)
Two screws (15), new
Screw in and tighten using 7/16-inch open-
Air manifold (14)
35.
Iockwashers (16),
end wrench, 7/16-inch socket, and
to dash brace (3)
handle.
and nuts (17)
Using plastic hammer, tap in.
Insert (19)
Elbow (18)
36.
a. Lube lightly with soap solution and push
Air line 533 (20)
Air manifold (14)
37.
in.
b. Screw on and tighten using 5/8-inch
and 1/2-inch open-end wrenches.
Push in.
Turn signal
36. Turn signal
flasher (22)
flasher holder (21)
Instrument panel
Close (page 4-244).
39.
4-950
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |