REMOVAL - TM-9-2320-270-20-30016

TM9-2320-270-20-3

DASH BRACE - CONTINUED

INITIAL SETUP CONTINUED

Equipment Condition Continued

Personnel Required

Air system drained (TM 9-2320-270-10).

Two

Left hood side panel removed and left side

of hood open (TM 9-2320-270-10).

Equipment Condition

Battery ground cable disconnected

(page 4-444).

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Make sure battery ground cable is disconnected to prevent possible injury and damage

to the electrical system.

Unplug.

Connector (2) and

1. Dash brace (1)

horn button wire (3)

a. Using cutting pliers, cut and take off.

Tie wrap (7)

2. Air hoses

b. Get rid of.

(4), (5), and (6)

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

Using 5/8-inch and 9/16-inch open-end

Nut (10)

3. Air line 27 (8) to

wrenches, unscrew.

trailer brake

handle assembly (9)

Using 5/8-inch and 9/16-inch open-end

Nut (12)

4. Air line 663 (11)

wrenches, unscrew.

to trailer brake

handle assembly (9)

Pull out and push up through hole in

Air line 27 (8) and

5. Trailer brake

dash brace.

air line 663 (11)

handle assembly (9)

Using long-nose pliers, take out.

Two inserts (14)

6. Adapters (13) or

air lines 27 (8)

and 663 (11)

4-944