 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2320-270-20-3
STEERING COLUMN BRACKET - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION
NOTE
If not installing steering column bracket brace, go to step 13.
Put in place.
Bracket brace (2)
Dash brace (1)
10.
Two capscrews (3),
Screw in and tighten using 1/2-inch box
Bracket brace (2)
11.
new Iockwashers
wrench, 1/2-inch socket, extension, and
to dash brace (1)
handle.
(4), and nuts (5)
Close (page 4-244).
Instrument panel
12.
a. Using knife, cut.
New rubber
Steering column (6)
13.
b. Put in place.
bushing (7)
Put in.
Bracket base (8)
14.
Have assistant raise into place and hold.
Steering column (6)
15.
Put in place.
Bracket cap (9) and
16.
bracket base (8)
Screw in but do not tighten using 5/16-
Two screws (10), new
17.
Bracket cap (9) and
inch key and 9/16-inch box wrench.
Iockwashers (11),
bracket brace (8)
and nuts (12)
to dash brace (1)
With help from assistant, screw on and
Two capscrews (15),
18.
Steering column
tighten using 1/2-inch box wrench, 1/2-
new Iockwashers
mounting plate (13)
(16), and nuts (17)
inch socket, handle, and extension.
to floor (14)
Two screws (10)
Using 5/16-inch key and 9/16-inch box
19.
Bracket cap (9) to
wrench, tighten.
and nuts (12)
bracket brace (8)
Floor mat (18)
Put in place.
20.
Floor (14)
Push down.
Grommet (19)
21
Steering column (6)
4-942
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals