Click here to make tpub.com your Home Page

Page Title: ASSEMBLY
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM9-2320-270-20-2
PUSHER AXLE HUB, DRUM, AND BEARING ASSEMBLY - CONTINUED
ACTION
REMARKS
LOCATION
ITEM
ASSEMBLY
WARNING
Some parts are heavy. Be careful when handling them. Lifting equipment is needed
when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds
(45 kg) for a two person lift, and over 150 pounds (68 kg) for a three or more person
lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy parts
supported only by lifting equipment. Failure to observe this precaution could cause
serious injury or death of personnel.
Rest on boards as shown.
Hub (1) and drum (2)
40.
WARNING
Make sure no grease remains on brakedrum and that no grease contacts brake linings.
If linings become contaminated with grease, brakes on that wheel will fail and could
cause serious accident. Contaminated linings cannot be cleaned and must be replaced.
Inner bearing
a. Apply gear lubricant oil.
41. H u b ( 1 )
b. Put in place.
cone (3)
New oil seal (4)
a. Position square and level in hub (l).
42.
b. Using ball-peen hammer and wood-
block, press in until level.
Turn woodblock one-third turn after
every one or two hammer taps to
prevent cocking.
c. Using brass drift and ball-peen ham-
mer, finish seating.
TA240585
4-920

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business