lNSPECTION/REPLACEMENT CONTINUED - TM-9-2320-270-20-20384

TM 9-2320-270-20-2

FRONT AXLE HUB, DRUM, AND BEARING ASSEMBLY- CONTINUED

ACTION

REMARKS

ITEM

LOCATION

lNSPECTION/REPLACEMENT CONTINUED

Note three reliefs (4) bored into

Inner (2) or outer

31. Hub (1)

hub (1).

(3) wheel bearing

b. Hook puller on cup (2) or (3) at

cup

reliefs (4).

c. Using puller, pull out.

d. Position new cup (2) or (3) square

and level.

e. Lay woodblock across bearing cup (2)

or (3).

f. Using ball-peen hammer and wood-

block, press in new cup (2) or (3).

Turn woodblock one-third turn after

every one or two hammer taps to

prevent cocking.

g. Using drift and ball-peen hammer,

tapping on alternate side of cup (2)

or (3) to prevent cocking, finish

seating.

TA240572

4-902