CLEANING - TM-9-2320-270-20-20380

TM 9-2320-270-20-2

FRONT AXLE HUB, DRUM, AND BEARINGS ASSEMBLY - CONTINUED

ACTION

ITEM

REMARKS

LOCATION

CLEANING

NOTE

All lubricant must be removed from bearings. Repeat step 20 as many times as

necessary to thoroughly clean bearings.

Inner bearing cone

Clean (TM 9-214).

20.

(1) and outer bearing

cone (2)

WARNING

Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or excessive heat. The flashpoint

is 100F to 138F (38 to 59C). If you become dizzy while using cleaning solvent, get

fresh air immediately and get medical aid. If contact with eyes is made, wash your eyes

with water and get medical aid immediately.

Hub cap (3), lock

Clean using solvent, cleaning brush, and

21.

rags.

plate (4), locknut

(5), capscrew (6),

and spacer (7)

Hub (8)

Clean using solvent, cleaning brush, and

22.

rags.

4-898