REMOVAL CONTINUED - TM-9-2320-270-20-20378

TM 9-2320-270-20-2

FRONT AXLE HUB, DRUM, AND BEARING ASSEMBLY - CONTINUED

ACTION

REMARKS

ITEM

LOCATION

REMOVAL CONTINUED

Turn hub (1) so notch (2) is by capscrew

Hub (1)

(3) on locknut (4).

WARNING

Some parts are heavy. Be careful when handling them. Lifting equipment is needed

when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds

(45 kg) for a two person lift, and over 150 pounds (68 kg) for a three or more person

lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy parts

supported only by lifting equipment. Failure to observe this precaution could cause

serious injury or death of personnel.

Using boards and lift truck, support.

Hub (1) and

brakedrum (5)

a. Using 9/16-inch socket and 3/8-inch

Capscrew (3)

10. Locknut (4) to

drive handle, unscrew and take out.

and Iockwasher (7)

axle skein (6)

b. Get rid of Iockwasher (7).

Take out.

Lock plate (8)

11.

Using front bearing nut wrench and wheel

Locknut (4)

12. Axle skein (6)

nut wrench handle, unscrew and take off.

Take out.

Bearing cone (9)

13. Hub (1)

a. Using boards and lift truck, take off.

Hub (1) and drum (5)

14. Axle skein (6)

b. With assistant, take off lift truck.

TA240568

4-896