|
|
TM 9-2320-270-20-2
AIR COMPRESSOR - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION CONTINUED
Screw in to slotted hole (5) part way.
Screw (3) and
to engine (2)
washer (4)
Push firmly into place.
Compressor (1)
33. Engine (2)
Screw in but do not tighten using 3/4-
Two screws (6) and
inch socket and handle.
Iockwashers (7)
to engine (2)
Screw in but do not tighten using 3/4-
Screw (3)
35.
inch box wrench.
Unscrew and take out.
Long screw (8)
36.
Screw in but do not tighten using 3/4-
37.
Screw (9) and
inch box wrench.
washer (10)
Using 3/4-inch socket, extension, and
Three screws
38.
torque wrench, tighten to 75 foot pounds
(6) and (9)
(101.7 Nm).
Using 3/4-inch wrench, tighten.
Screw (3)
39.
Drive pulley (12)
a. Using plastic-face hammer, tap pulley
40. Shaft (11)
and nut (13)
(12) in place.
b. Screw on nut (13) and tighten using
1 1/8-inch socket and handle.
4-848
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |