lNSTALLATION CONTINUED - TM-9-2320-270-20-20078

TM 9-2320-270-20-2

INTERAXLE, TRANSFER CASE TO FRONT AXLE AND TANDEM AXLE PROPELLER

SHAFTS - CONTINUED

ACTION

REMARKS

ITEM

LOCATION

lNSTALLATION CONTINUED

WARNING

Some parts are heavy. Be careful when handling them. Lifting equipment is needed

when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds

(45 kg) for a two person lift, and over 150 pounds (68 kg) for a three or more person

lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy parts

supported only by lifting equipment. Failure to observe this precaution could cause

serious injury or death of personnel.

Put cross (3) into front axle yoke (1).

Splined shaft (2)

Front axle yoke (1)

33.

Two bearing and cap

Using hammer, tap in.

34.

assemblies (4)

Four screws (5) and

Screw in and tighten using 9/16-inch

Two bearing and cap

35.

socket and handle.

two lock plates (6)

assemblies (4) to

front axle yoke (1)

Two lock plates (6)

Using hammer and punch, bend up tabs.

36.

Front axle yoke (1)

Rotate and check operation of joints.

Cross (3) and two

37.

Splined shaft (2)

If any joints bind, tap with hammer

bearing and cap

and front axle

to relieve pressure.

assemblies (4)

yoke (1)

Put on.

Dust cap (7), steel

33.

Splined shaft (2)

washer (8), and cork

washer (9)

4-596