 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-2
EXTERNAL OIL FILTER - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
DISASSEMBLY CONTINUED
NOTE
Plug is under spring tension.
a. Using adjustable wrench, unscrew and
Plug (2), gasket
12. Base (1)
(3), spring (4),
take out.
b. Get rid of gasket (3).
and valve (5)
Two elbows (6)
Using adjustable wrench, unscrew and take
13.
out.
CLEANING/INSPECTION
14.
All parts
Clean and inspect as shown in the general
maintenance instructions (page 4-1).
ASSEMBLY
15. Base (1)
Two elbows (6)
Screw in and tighten using adjustable
wrench.
Plug (2), new
Screw in and tighten using adjustable
16.
wrench.
gasket (3), spring
(4), and valve (5)
Put in.
Stud (8) and
17. Shell (7)
washer (9)
Retainer (10), new
Put on.
18. Stud (8)
gasket (11), washer
(12), and spring (13)
New retainer
Screw on and tighten using 15/16-inch
19.
clip (14)
and 1 1/8-inch wrenches.
Filter element (15)
Put in.
20. Shell (7)
New gasket (16)
Put in.
21. Base (1)
Stud (8)
Screw in and tighten to 22-25 ft-lb
22. Shell (7) to
(30-34 Nm) using 1 1/8-inch socket and
base (1)
torque wrench.
23. Base (1)
Bracket (17)
Place in position.
Four screws (18), new
Screw in and tighten using 9/16-inch
24. Base (1) to
Iockwashers (19) and
socket, handle, extension, and 9/16-
bracket (17)
nuts (20)
inch wrench.
4-566
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals