 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-2
RETARDER CONTROL LINKAGE - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
ADJUSTMENT - CONTINUED
62. Mounting bracket (1)
Control pedal (3)
a. Depress as far as possible.
and stop screw (2)
Retarder control valve should reach
end of travel before pedal touches
stop screw.
b. Release.
NOTE
If retarder control valve reaches end of travel when control pedal is depressed, skip
steps 83 thru 71.
Detachable ball-
a. Pull down on joint socket.
63. Control pedal (3)
b. Pull joint socket off of joint ball.
and pedal rod (4)
joint (5)
Pull back.
64. Mounting bracket (1)
Control pedal (3)
with assembled parts
Floormat (8)
a. Pull up.
65. Cab floor (6),
stop screw (2), and
b. Move back.
dimmer switch (7)
if not already loose, using 1/2-inch
Nut (9)
66. Socket part of
detachable balljoint
open-end wrench, unscrew part way.
(5) and pedal rod (4)
Unscrew two turns.
Socket part of
67. Pedal rod (4)
detachable ball-
joint (5)
Nut (9)
Using 1/2-inch open-end wrench, tighten
68. Socket part of
against joint socket.
detachable balljoint
(5) and pedal rod (4)
Place in position.
Floormat (8)
69. Cab floor (6),
stop screw (2), and
dimmer switch (7)
Move forward to operating position.
70. Mounting bracket (1)
Control pedal (3)
Detachable ball-
a. Pull down on joint socket.
71. Control pedal (3)
joint (5)
b. Push joint socket onto joint ball.
and pedal rod (4)
c. Repeat steps 62 thru 71.
4-558
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals