 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-2
RETARDER CONTROL LINKAGE - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL CONTINUED
a. Place nut (1) in machinist's vise.
Stop screw (2)
11. Nut (1)
b. Using 3/8-inch open-end wrench,
unscrew and take out.
c. Take nut (1) out of machinist's vise.
Using 7/16-inch open-end wrench,
Non-detachable ball-
12. Retarder control
unscrew and take out.
joint (4) with
lever (3)
assembled parts
Two cotter pins (6)
a. Using long roundnose pliers,
13. Two clevis pins (5)
straighten and pull out.
b. Get rid of.
Take out.
Two clevis pins (5)
14. Two clevises (7)
Two clevises (7)
Take off.
15. Retarder control
with assembled parts
lever (3) and
retarder control
valve (8)
Two nuts (11),
a. Using two 7/16-inch open-end
16. Anchor (9) and
wrenches, unscrew and take apart.
screws (12), and
plate (10)
Iockwashers (13)
b. Get rid of Iockwashers (13).
Take off.
Anchor (9)
17. Plate (10) and
retarder control
lever (3)
Right side hood
Close (TM 9-2320-270-10).
18. Engine compartment
Left side hood
Open (TM 9-2320-270-10).
19.
Two nuts (16),
a. Using two 7/16-inch open-end
20. Anchor (14) and
wrenches, unscrew and take apart.
screws (17), and
pIate (15)
b. Get rid of Iockwashers (18).
Iockwashers (18)
Anchor (14) and
Take off.
21. Plate (15)
retarder control
lever (3)
4-550
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals