|
|
TM 9-2320-270-20-1
SHlFT CONTROL LAMP - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Put in D (drive) position.
Shift lever (2)
1.
Shift control
assembly (1)
Unscrew and take off.
Shift knob (3)
2.
Shift lever (2)
Using cross-tip screwdriver, unscrew and
Indicator assembly
Four screws (5)
3.
take out.
(4) to shift con-
trol assembly (1)
Lift up part way.
Indicator
4.
Shift control
assembly (4)
assembly (1)
a. Using flat-tip screwdriver, pry leg (7)
Lampholder
Indicator
5.
away from indicator assembly (4).
assembly (4)
bracket (6)
b. pull off.
Push in, turn one-quarter turn counter-
Lamp (9)
6.
Lampholder (8)
clockwise, and take out.
INSTALLATION
Push in and turn one-quarter turn
Lamp (9)
7.
Lampholder (8)
clockwise.
Snap on.
Lampholder
Indicator
8.
bracket (6)
assembly (4)
Put in place.
Indicator
Shift control
9.
assembly (4)
assembly (1)
Screw in and tighten using cross-tip
Four screws (5)
Indicator assembly
10.
screwdriver.
(4) to shift control
assembly (1)
Screw on and tighten.
Shift knob (3)
11.
Shift lever (2)
Place in N (neutral).
Shift lever (2)
12.
Shift control
assembly (1)
4-520
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |