 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-1
BATTERIES - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
CLEANING/inspection
Clean and inspect (TM 9-6140-200-14).
Four batteries (1)
9.
TEST PROCEDURES
Test (TM 9-6140-200-14).
Four batteries (1)
10.
INSTALLATION
CAUTION
Make sure batteries are installed in same locations. Batteries must be instaIled correctly
to prevent damage to electrical system.
Using handles, set in place.
Four batteries (1)
Battery box (2)
11.
Push firmly against batteries (l).
Four battery stop
12.
angles (3)
Using socket, handle and extension,
12 capscrews (4)
Four battery stop
13.
tighten.
angles (3) to
battery box (2)
Screw on.
Four spring
Four threaded rods
14.
nuts (7)
(5) and (6)
Slide in and put in place.
Four spring nuts
Four tiedown
15.
(7) on threaded
channels (8)
rods (5) and (6)
Put in place.
Two battery hold-
Four batteries (2)
16.
down frames (9)
and four threaded
rods (5) and (6)
Screw on, but do not tighten.
Three washers (10)
Three threaded
17.
rods (5)
and wingnut (11)
Screw on, but do not tighten.
Washer (12) and
Threaded rod (6)
18.
nut (13)
4-464
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals