REMOVAL- CONTINUED - TM-9-2320-270-20-10726

TM 9-2320-270-20-1

BATTERY CABLES - CONTINUED

ACTION

REMARKS

ITEM

LOCATION

REMOVAL - CONTINUED

a. Using 7/16-inch box wrench and 7/16-

Screw (3), washer

25. Loop clamp (1)

inch socket and handle, unscrew and

(4), nut (5), and

to battery box

take off.

Iockwasher (6)

support (2)

b. Get rid of Iockwasher (6).

Spread and take off.

Loop clamp (1)

26. Two battery cables

(7) and (8)

Using 9/16-inch socket and handle, un-

27. Loop clamp (9) to

Nut (11) and

screw and take off.

lockwasher (12)

transmission

support (lo)

Loop clamp (9)

Spread and take off.

28. Battery cables

(7) and (8)

Tie wraps (13)

a. Using cutting pliers, cut and take off.

29.

b. Get rid of.

CAUTION

When pulling out battery cables, do not snag other wires.

Pull up.

30. Under left side

Battery cables

(7) and (8)

of cab (14)

Take out.

Battery cables

31. Battery box (15)

(7) and (8)

CLEANING/inspection

Clean and inspect (TM 9-6140-200-14).

Battery cables,

32.

battery terminals,

and battery posts

INSTALLATION

WARNING

Do not smoke, use open flame, or allow sparks near batteries. The mixture of oxygen

and hydrogen gases released from batteries is highly flammable and can explode

causing serious injury or death.

NOTE

On positive cable and ground cable, 1/2-inch terminal goes to starter and 3/8-inch

terminal goes to battery.

4-452