|
|
TM 9-2320-270-20-1
WINCH CONTROL PANEL ENGINE SHUTDOWN SWITCH - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL CONTINUED
a. Using screwdriver, unscrew and take
Screw (2), lock-
4. Terminal (1)
washer (3), and
off.
b. Get rid of Iockwasher (3).
wire 279 (4)
a. Using screwdriver, unscrew and take
Screw (6), lock-
5. Terminal (5)
off.
washer (7), and
b. Get rid of Iockwasher (7).
wire 019 (8)
Take out.
Shutdown
6. Winch control
panel (9)
switch (10)
INSTALLATION
Place in position.
7. Winch control
Shutdown
panel (9)
switch (10)
Put on.
New Iockwasher (7)
8. Screw (6)
and wire 019 (8)
Screw in and tighten using screwdriver.
Screw (6)
9. Terminal (5)
Put on.
New Iockwasher (3)
10. Screw (2)
and wire 279 (4)
Screw in and tighten using screwdriver.
Screw (2)
11. Terminal (1)
Push into place.
Shutdown
12. Winch control
panel (9)
switch (10)
ON/OFF ring (11)
Put in place.
13.
14. Shutdown switch (10)
New Iockwasher (12)
Put on.
Nut and boot
a. Push on.
15.
assembly (13)
b. Screw on and tighten using 5/8-inch
wrench.
4-432
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |