|
|
TM 9-2320-270-20-1
OIL PRESSURE SENDING UNIT AND LOW OIL PRESSURE SWITCH - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSPECTION
Inspect for stripped threads, cracks,
All parts
12.
and breaks.
Replace damaged parts.
INSTALLATION
a.
Wrap threads with teflon tape
Block fitting (2)
13. Engine block (1)
b.
Screw in and tighten using 1 1/16-inch
wrench.
Wrap threads with teflon tape
a.
Reducer (3)
14. Block fitting (2)
b.
Screw in and tighten using 5/8-inch
wrench.
a.
Wrap thread with teflon tape
Nipple (4)
15. Reducer (3)
Screw in finger tight.
b.
Screw on and tighten using pipe wrench.
Tee (5)
16. Nipple (4)
Make sure tee is in horizontal
position when tightened.
a. Wrap threads with teflon tape
Low oil pressure
17. Tee (5)
switch (6)
b. Screw in and tighten using 1 1/16-inch
wrench.
Plug in.
Wire 525 (7)
18. Low oil pressure
switch (6)
a. Wrap threads with teflon tape
Sending unit (8)
19. Pipe tee (5)
b. Screw in and tighten using adjustable
wrench.
4-396
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |