|
|
TM 9-2320-270-20-1
OIL PRESSURE SENDING UNIT AND LOW OIL PRESSURE SWITCH - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL - CONTINUED
a. Using 3/8-inch wrench, unscrew and
Nut (3) and
1. Wire 113 (1) to
take off.
Iockwasher (4)
sending unit (2)
b. Get rid of Iockwasher (4).
Take off.
Wire 113 (l),
2. Terminal (5)
nut (6), and
washer (7)
Using adjustable wrench, unscrew and take
Sending unit (2)
3. Tee (8)
out.
Unplug.
Wire 525 (10)
4. Low oil pressure
switch (9)
Using 1 1/16-inch wrench, unscrew and
Low oil pressure
5. Tee (8)
take out.
switch (9)
Using 5/8-inch and pipe wrenches,
a.
Tee (8)
6. Reducer (11)
unscrew and take off.
If nipple (12) stayed in tee (8) and
b.
is damaged, secure tee (8) in vise.
Using pipe wrench, unscrew and take
c.
out nipple (12).
Get rid of nipple (12).
d.
If nipple stayed in reducer (11) and
a.
Nipple (12)
7.
is damaged, using pipe and 5/8-inch
wrenches, unscrew and take out.
Get rid of.
b.
Using 5/8-inch and 1 1/16-inch wrenches,
Reducer (11)
8. Block fitting (13)
unscrew and take out.
Using 1 1/16-inch wrench, unscrew and
Block fitting (13)
9. Engine block (14)
take out.
4-394
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |