|
|
TM9-2320-270-20-1
DOME LIGHT - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using flat-tip screwdriver, unscrew and
Two screws (3)
Rim (1) to
1.
take out.
bowl (2)
Take off.
Rim (1) and lens (4)
Bowl (2)
2.
Push, turn one-quarter turn counter-
Lamp (5)
3.
clockwise and take out lamp.
a. Take off.
Gasket (6)
4.
b. Get rid of.
Four screws (8)
Using cross-tip screwdriver, unscrew and
Bowl (2) to inner
5.
take out.
roof panel (7)
Pull out part way.
Inner roof panel (7)
Bowl (2)
6.
Using diagonal-cutting pliers, cut at end
Wire (10)
Crimp connector (9)
7.
nearest panel (7).
a. Using diagonal-cutting pliers, cut.
Lead (11)
8.
b. Get rid of connector (11).
INSTALLATION
NOTE
For wire and connector repair, see general maintenance instructions (page 4-1).
Put on.
Connector (9)
9. Lead (11)
Put in.
Wire (10)
10. Connector (9)
Using crimping tool, crimp.
11.
Connector (9)
4-330
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |