|
|
TM 9-2320-270-20-1
DIODE ASSEMBLY - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
CAUTION
Make sure ignition switch is off before replacing either diode assembly to prevent
possible damage to electrical system.
NOTE
Tag wires according to general maintenance instructions (page 4-1).
a. Using diagonal-cutting pliers, cut.
Two tie wraps (3)
1. Wire bundles (1) and
b. Get rid of.
diode (2)
Unplug.
Wire (5)
2. Diode red end (4)
Unplug and take out.
Wire (7)
3. Taped end (6)
INSTALLATION
Plug in.
Wire (7)
Taped end (6)
4.
Plug in.
Wire (5)
Diode red end (4)
5.
Using slip-joint pliers, put on.
Two new tie
Diode (2) and wire
6.
wraps (3)
bundles (1)
TA240015
4-324
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |