|
|
TM 9-2320-270-201
WARNING AND INDICATING LAMP ASSEMBLY - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION
NOTE
If wire or connector repair is necessary, see general maintenance instructions
11.
Lampholder (4) to
Put on.
Lug terminal (15),
IGN terminal (9)
wire (12), and new
Iockwasher (11)
Nut (10)
12.
Screw on and tighten using 3/8-inch
open-end wrench.
13.
Plug in.
Bullet
Bullet plug (14)
connector (13)
14.
Instrument
Put in.
Lamp body (3) and
panel (1)
new Iockwasher (7)
15.
Lamp body (3) to
Nut (6)
Screw on and tighten using 7/8-inch
instrument panel (1)
box wrench.
16.
Lampholder (4)
Push in and turn clockwise one-quarter
Lamp (5)
turn.
Lamp body (3)
17.
Lampholder (4)
Push in.
18.
Wires (8)
New tie wraps
Using slip-joint pliers, put on.
4-255
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |