|
|
TM
9-2320-270-20-1
THERMOSTATS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
LEFT THERMOSTAT REMOVAL - CONTINUED
a. Put container underneath.
Plug (2)
14. Left thermostat
b. Using key, unscrew and take out.
housing cover (1)
c. When coolant stops draining, screw in
until flush with cover (1) using key.
d. Get rid of fluid (page 4-1).
Using screwdriver, unscrew part way.
Three screws (4)
15. Three hose
clamps (3)
a. Using 9/16-inch socket, extension, and
Four screws (6)
16. Thermostat
handle, unscrew and take out.
and Iockwashers (7)
housing cover
b. Get rid of Iockwashers (7).
(1) to thermostat
housing (5)
Using rubber hammer, tap off.
Thermostat housing
17. Thermostat
cover (1)
housing (5)
a. Using knife, scrape off.
Gasket (8)
18. Thermostat
b. Get rid of.
housing cover (1)
a. Take out.
Thermostat (9)
19. Thermostat
b. Get rid of packing (10).
and packing (10)
housing (5)
CLEANING AND INSPECTION
Clean and inspect as shown in the general
All parts
20.
maintenance instructions (page 4-1).
TESTING
a. Put in container of water heated to
Thermostat (9)
21.
between 170 and 185F (77 and
85"C).
c. If thermostat (9) does not open in 10
minutes, replace it.
NOTE
If one thermostat is bad, replace both.
4-178
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |