 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-270-20-1
HEAT EXCHANGER HOSES, TUBES, AND FITTINGS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL - CONTINUED
a.
Pull off.
Hose (2) and
9. Tube (1)
b.
Pull apart.
tube (3)
Four screws (6)
a.
Using 9/16-inch socket, extension, and
10. Bracket (4) to
frame (5)
handle, unscrew and take out.
and Iockwashers (7)
b.
Get rid of Iockwashers (7).
Take off.
11. Frame (5)
Bracket (4)
Tube (1) and
a. Using pry bar, unscrew and take out.
12. Heat exchanger (8)
nipple (9)
b. Using pipe wrench, unscrew and take
apart.
Four nuts (11)
Using 7/16-inch wrench, unscrew part way.
13. Four hose
clamps (10)
Two hoses (14) and
14. Tube (12) and oil
a. Pull off.
tube (15)
b. Pull apart.
cooler (13)
Tube (12) and
a. Using pry bar, unscrew and take out.
15. Heat exchanger (8)
b. Using pipe wrench, unscrew and take
nipple (16)
apart.
CLEANING AND INSPECTION
All parts
Clean and inspect as shown in the general
16.
maintenance instructions (page 4-1).
INSTALLATION
17. Tube (12)
Nipple (16)
Screw in about halfway using pipe wrench.
Tube (12) and
Screw in almost all the way.
18. Heat exchanger (8)
nipple (16)
Make sure tube opening is on top.
Push on.
Two hoses (14)
19. Tube (15)
Push on.
Two hoses (14) and
20. Tube (12) and oil
tube (15)
cooler (13)
Four nuts (11)
Using 7/16-inch wrench, tighten.
21. Four hose
clamps (10)
4-170
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals