|
|
TM 9-2320-270-20-1
RADIATOR GUARDS AND SHROUDS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
CLEANING AND INSPECTION
All parts
Clean and inspect as shown in the general
18.
maintenance instructions (page 4-l).
INSTALLATION
WARNING
Some parts are heavy. Be careful when handling them. Lifting equipment is needed
when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds
(45 kg) for a two person lift, and over 150 pounds (68 kg) for a three or more person
lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy parts
supported only by lifting equipment. Failure to observe this precaution could cause
serious injury or death of personnel.
Put on.
Radiator shroud (2)
19. Radiator (1)
and two radiator
guard supports (3)
Put on.
Three clamps (4)
20. Right side
support (3)
10 screws (5) and
Screw in and tighten using 1/2-inch
21. Two radiator guard
new Iockwashers (6)
socket, extension, and handle.
supports (3) to
radiator (1)
Put on.
Radiator fan (8)
22. Pulley (7)
Four screws (9) and
Screw in and tighten using 3/4-inch
23. Radiator fan (8) to
Iockwasher (10)
socket and handle.
pulley (7)
With help from assistant, put on.
Upper radiator
24. Radiator guard (11)
shroud (12)
11 screws (13), 11
Screw in and tighten using 1/2-inch
25. Upper radiator
washers (14), 22
socket and handle and screwdriver.
shroud (12) to
new Iockwashers
radiator guard (11)
(15), and nuts (16)
WARNING
Some parts are heavy. Be careful when handling them. Lifting equipment is needed
when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds
(45 kg) for a two person lift, and over 150 pounds (66 kg) for a three or more person
lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy parts
supported only by lifting equipment. Failure to observe this precaution could cause
serious injury or death of personnel.
4-156
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |