|
|
TM 9-2320-270-20-1
FUEL STRAINER, COVER, AND BRACKET - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION
Put on.
Bracket (2)
10. Frame (1)
Two screws (3), new
Screw in and tighten using 9/16-inch
11. Bracket (2) to
Iockwashers (4),
socket, handle, and 9/16-inch wrench.
frame (1)
and nuts (5)
Put on.
Strainer cover (6)
12. Bracket (2)
Two screws (7), new
Screw in and tighten using 9/16-inch
13. Strainer cover (6)
Iockwashers (8),
socket, handle, and 9/16-inch wrench.
to bracket (2)
and nuts (9)
Two plugs (10)
Screw in until flush using 9/32-inch
14. Strainer cover (6)
pipe plug wrench.
Two elbows (11)
Screw in and tighten using 3/4-inch
15.
wrench.
Two hoses (12)
Screw on and tighten using l-inch wrench.
16. Two elbows (11)
WARNING
No open flames, welding, grinding, smoking, or use of heat producing devices
permitted nearby when using fuel. Fuel burns easily and fumes are explosive. Keep
battery disconnected. Failure to observe these precautions could cause serious injury.
New fuel
a. Fill to top with diesel fuel.
17. Strainer cover (6)
b. Screw on until gasket (14) touches
strainer (13)
cover (1), then using filter removal
tool, screw on one more complete turn.
4-116
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |