|
|
TM9-2320-270-20-1
AIR CLEANER ASSEMBLY - CONTINUED
INITIAL SETUP
Materials/Parts Continued
Tools
Lockwasher, heat shield to fender
Handle, ratchet, 3/8-inch drive
(three required)
Screwdriver, flat-tip, 1/4-inch,
Lockwasher, pivot bracket to air
4-inch blade
cleaner bracket (two required)
Socket, 7/16-inch, 3/8-inch drive
Lockwasher, stop to air cleaner
Socket, 1/2-inch, 3/8-inch drive
bracket (two required)
Socket, 9/16-inch, 3/8-inch drive
Wrench, open-end, 7/16-inch
Personnel Required
Wrench, open-end, 1/2-inch
Wrench, open-end, 9/16-inch
Two
Materials/Parts
Equipment Condition
Lockwasher, air cleaner bracket
Left side of hood open and left side
to fender (five required)
panel removed (TM 9-2320-270-10).
Lockwasher, air cleaner bracket
to housing (eight required)
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Using screwdriver, unscrew part way.
Two screws (2)
1. Left front of
vehicle/two air
cleaner hose
clamps (1)
Pull off and move aside.
Air cleaner hose (4)
2. Air cleaner
assembly (3)
Three bolts (7), six
a. Using 9/16-inch socket, handle, and
3. Two air cleaner
9/16-inch wrench, unscrew and take
washers (8), three
brackets (5) to
out.
Iockwashers (9), and
fender (6)
nuts (10)
b. Get rid of Iockwashers (9).
a. Using 9/16-inch socket and handle,
TWO bolts (1 1),
4.
unscrew and take out.
Iockwashers (12),
b. Get rid of Iockwashers (12).
and six washers (13)
4-50
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |