REMOVAL CONTINUED - TM-9-2320-270-20-10320

TM9-2320-270-20-1

AIR CLEANER FILTERS - CONTINUED

ACTION

REMARKS

ITEM

LOCATION

REMOVAL CONTINUED

Using 1/2-inch socket, handle, exten-

TWO bolts (3)

3. Strap (1) to

sion, and 1/2-inch wrench, unscrew and

and nuts (4)

two brackets (2)

take out.

Take off.

Strap (1)

4. Filter (5)

Using 1/2-inch socket, handle, and 1/2-

TWO bolts (8)

5. Strap (6) to two

inch wrench, unscrew and take out.

and nuts (9)

brackets (7)

Take off.

Strap (6)

6. Filter (5)

Using 9/16-inch socket, handle, and 9/16-

Four bolts (12) and

7. Front bracket (10)

inch wrench, unscrew and take out.

nuts (13)

to housing (11)

Take off.

Front bracket (10)

8. Housing (11)

WARNING

After Nuclear, Biological, or Chemical (NBC) exposure of this vehicle, all air filters

shall be handled with extreme caution. Unprotected personnel may experience injury or

death if residual toxic agents or radioactive material are present. If vehicle is exposed to

chemical or biological agents, servicing personnel shall wear protective mask, hood,

protective overgarments, and chemical protective gloves and boots. All contaminated

air filters shall be placed into double-lined plastic bags and swiftly moved to a

segregation area away from the worksite. The same procedure applies for radioactive

dust contamination, however, the Company NBC team should measure the radiation

prior to filter removal to determine the extent of safety procedures required per the NBC

Annex to the unit Standard Operating Procedures (SOP). The segregation area in which

the contaminated air filters are temporarily stored shall be marked with appropriate NBC

placards. Final disposal of contaminated air filters shall be in accordance with local

SOP.

Take off.

9. Fender (14)

Filter (5)

Using 1/2-inch socket and handle, loosen,

Four screws (16)

10. Four tabs (15) to

but do not remove.

housing (11)

Move four tabs (15) and take out.

Filter (5)

11. Housing (11)

4-46