|
|
TM9-2320-270-20-1
FUEL SYSTEM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WARNING
Be sure to wear safety goggles or lenses when using compressed air. Compressed air
and particles moved by compressed air can cause damage to your eyes.
11. Air supply hose (9)
Hose (3)
a. Connect to air supply hose (9) and air
pressure gage to right fuel tank (7).
b. Using air compressor, pressurize fuel
tank (7).
c. When air pressure reaches 40 psi (276
kPa), turn off air supply.
12.
Engine
Start and let run for a few minutes, then
shut down (TM 9-2320-270-10).
13. Right fuel tank (7)
Cap (10)
a. Unscrew, part way.
b. Let air pressure escape.
c. When all air pressure has escaped,
screw on and tighten.
d. Disconnect air supply.
14.
Hose (3)
Using 9/16-inch wrench, unscrew and take
out.
15.
Vent plug (8)
Screw into right fuel tank (7) and tighten
using 9/16-inch socket and handle.
16. Valve (5)
Handle (6)
Push down.
4-35
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |