|
|
TM9-2320-270-20-1
OIL FILTER - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
DISASSEMBLY
Using 5/8-inch socket and handIe, un-
Stud (3)
5. Shell (1) to
screw until shell (1) and adapter
adapter (2)
separate.
a. Take out.
Filter element (4)
6. Shell (1)
b. Get rid of gasket (5).
and gasket (5)
Using 5/8-inch socket, handle, and
Nut (6)
7. Stud (3)
wrench, unscrew and take off.
a. Take off.
Retainer (7), seal
8.
b. Get rid of seal (8).
(8), washer (9),
and spring (10)
a. Take out.
Stud (3) and
9. Shell (1)
b. Get rid of gasket (11).
gasket (11)
NOTE
If oil filter shell does not have draincock, skip steps 10 thru 12.
Using adjustable wrench, unscrew and
Draincock (13)
10. Elbow (12)
take out.
a. Note position for proper placement
Elbow (12)
11. Pipe nipple (14)
during assembly.
b. Using adjustable pipe wrench, unscrew
and take off.
Using adjustable pipe wrench,
Pipe nipple (14)
12. Shell (1)
unscrew and take out.
CLEANING AND INSPECTION
Clean and inspect as shown in the general
All parts
13.
maintenance instructions (page 4-1).
4-26
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |