DOME LIGHT DOES NOT WORK. - TM-9-2320-270-20-10146

TM9-2320-270-20-1

TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

32. DOME LIGHT DOES NOT WORK.

Step 1.

Put warning light switch (1) in ON position, and make sure blackout switch (2) is

in LIGHTS position.

If warning light does not work, go to step 5.

Step 2.

Put warning light switch (1) in OFF position. Put dome light switch (3) in ON

position. Open instrument panel (page 4-244). Using multimeter set at

30 vdc, put red probe on dome lights-switch terminal (4) and black probe

on panel (5).

If meter reads no voltage, go to step 4.

TA239672

3-84