|
|
TM 9-2320-269-34-1
REAR-REAR AXLE DIFFERENTIAL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
12.
Two bearing
Two bearing cups (2)
Take off.
cones (1)
13.
Flanged case (3)
Two bearing
Using gear and bearing puller, pull off.
and bearing case (4)
cones (1)
14.
Bearing case (4)
Eight screws (5) and a.
Using scribe, matchmark both
cases
nuts (6)
(3) and (4).
b.
Using 3/4-inch socket, ratchet handle
with 1/2-inch drive, and 3/4-inch
open-end wrench, unscrew and take
out.
15.
Flanged case (3)
Bearing case (4)
Take off.
16.
Side thrust washer
a.
Take off.
(7), side gear (8),
b.
Get rid of washer (7).
and differential
spider (9)
17.
Side gear (10) and
a.
Take out.
side thrust
b.
Get rid of washer (11).
washer (11)
18.
Oil scoop (12)
Screw (13) and lock-
a.
Using 7/16-inch socket
and ratchet
washer (14)
handle with 1/2-inch drive, unscrew
and take out.
b.
Get rid of lockwasher (14).
19.
Flanged case (3)
Oil scoop (12)
Take out.
NOTE
Do not separate ring gear from flanged case unless the gear or case is damaged and must be replaced.
Do not use chisel to cut off rivet heads.
20.
Twelve rivets (15)
a.
Using pencil grinder, grind off each
head.
b.
Using ball-peen hammer and 3/8-inch
blunt-point drive-pin punch, drive
out rivets.
c.
Get rid of.
2-912
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |