INSTALLATION - CONTINUED - TM-9-2320-269-34-10859

TM 9-2320-269-34-1

TANDEM AXLE ASSEMBLY - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

INSTALLATION - CONTINUED

NOTE

Steps 33 thru 36 will connect wheel sensor wiring to rear-rear axle housing. Do the same steps for forward-rear axle

housing.

33. Axle housing (1)

Two wheel sensor

Put in position.

wires (2)

34. Three studs (3)

Three clips (4) with

Put on.

wheel sensor

wires (2)

35. Three studs (3)

Three new lock-

Screw on, and tighten using 7116-inch

and clips (4)

washers (5) and

open-end wrench.

nuts (6)

36. Four wire sensor

Four connectors (8)

Push together.

wires (2) and (7)

37. Two rear-rear

Two hose

Put in position.

airbrake

assemblies (10)

chambers (9)

38. Two elbows (11)

Two hose

Screw on, and tighten using 7/8-inch and

assemblies (10)

1-inch open-end wrenches.

TA238514

2-842