CLEANING - TM-9-2320-269-34-10833

TM 9-2320-269-34-1

TRANSMISSION REAR MOUNT, CROSSMEMBER, AND SUPPORT BRACKETS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

CLEANING

NOTE

For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).

WARNING

Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using

solvent. Failure to observe these precautions could cause serious injury or death.

11.

All metal parts

Clean in drycleaning solvent.

Dry with clean, dry rags.

INSPECTION/REPLACEMENT

NOTE

For more information on how to inspect parts, go to General Maintenance Instructions (page 2-46).

Replace damaged or defective parts, as needed.

12.

All metal parts

Look for breaks, dents, and cracks.

INSTALLATION

13.

Side frame

Transmission left

Put in position.

member (1)

support bracket (2)

14.

Transmission left

Two screws (3)Screw on until snug using 3/4-inch soc-

support bracket (2)

and nuts (4) ket, 5-inch extension, ratchet handle

and side frame

with 112-inch drive, and 3/4-inch open-

member (1)

end wrench.

15.

Side frame

Transmission right Put in position.

member (5)

support bracket (6)

16.

Transmission right

Two screws (7)Screw on until snug using 3/4-inch soc-

support bracket (6)

and nuts (8) ket, ratchet handle with 1/2-inch drive,

and side frame

and 3/4-inch open-end wrench.

member (5)

2-816