|
|
TM 9-2320-269-34-1
TRANSMISSION SELECTOR LEVER AND SHIFT LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL AND DISASSEMBLY - CONTINUED
22.
Cable clamp (1)
Screw (2)
Using 1/2-inch socket and ratchet handle
with 1/2-inch drive, unscrew and tak e out.
23.
Governor cover (3)
Cable clamp (1)
a.
Take off.
b.
Put screw (2) back in finger tight.
24.
Shift lever (4)
Nut (5)
Hold lever (4) firmly and using 9/16-inch
socket and ratchet handle with 1/2-inch
drive, unscrew and take off.
25.
Lever shaft (6)
Shift lever (4)
Take off.
26.
Swivel (7)
Cotter pin (8)
a.
Using angle-nose slip-joint pliers,
straighten and pull out.
b.
Get rid of.
27.
Shift lever (9) and
Take off.
three washers (10)
28.
Control cable (11)
Nut (12)
Note the location of the nut on the cable
and using 1/2-inch open-end wrench and
pliers wrench, loosen.
29.
Swivel (7)
Using angle-nose slip-joint pliers, un-
screw and take off.
30.
Nut (12)
Return nut to original location on the
cable.
2-794
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |