|
|
TM 9-2320-269-34-1
GEAR UNIT AND MAIN SHAFT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
34.
Rear planetary
Bearing race (2)
a.
Lubricate with oil soluble grease.
sun gear (1)
and needle bearing
b.
Put in position.
assembly (3)
35.
Center planetary
Center planetary
Put in position.
ring gear (4)
carrier assembly (5)
36.
Center planetary
Front planetary
Put in position.
carrier assembly (5)
ring gear (6)
37.
Front planetary
Snapring (7)
a.
Put in position.
ring gear (6)
b.
Using 114-inch flat-tip screw-
driver, put in.
38.
Main shaft (8)
Center sun gear
Put in position.
shaft (9)
39.
Front carrier
Planet carrier
a.
Lubricate with oil soluble grease.
assembly (10)
thrust washer (11)
b.
Put in position.
40.
Front planetary
Front carrier
Put in position.
ring gear (12)
assembly (10)
41.
Front sun gear (13)
Sun gear thrust
a.
Lubricate with oil soluble grease.
washer (14)
b.
Put in position.
42.
Center sun gear
Front sun gear (13)
a.
Align gap In internal splines with pin
shaft (9)
on shaft.
b.
Put on.
43.
Gear unit and main
Sun gear thrust
a.
Lubricate with oil soluble grease.
shaft (15)
washers (16)
b.
Put in position.
and (17)
2-766
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |